EditorX-81 Sensor Input MIDI Message

From I-CubeX Wiki
Revision as of 21:55, 21 November 2018 by Admin (talk | contribs)
Jump to: navigation, search

The MIDI Message subsection configures the sensor input to output MIDI messages that contain the sensor value.

The following MIDI messages can be selected:

  • NoteOff
  • NoteOn (velocity)
  • KeyPressure
  • ControlChange
  • ProgramChange
  • AfterTouch
  • PitchBend
  • NoteOn (note)

Editorx-81 sensor input message controlchange.png Editorx-81 sensor input message pitchbend.png

Editorx-81 sensor input message noteonvelocity.png Editorx-81 sensor input message noteonnote.png

The minimum and maximum values of the MIDI message can be set with the slider and/or number fields.

Editorx-81 sensor input message range.png

If the sensor input is configured to process values continuously as well as detect peaks or dips and their ending, the peak or dip and their ending are sent in the form of the selected MIDI message but additional MIDI key-pressure messages are sent to transmit the sensor value after the peak or dip is detected and until their end is detected.

Please refer to the EDIT CONFIG command for more information about MIDI messaging than provided here.

Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=EditorX-81_Sensor_Input_MIDI_Message&oldid=3578"