Firmware-810 Command-100
Revision as of 20:38, 22 June 2018 by Admin (talk | contribs) (Copied from Firmware-800 Command-100, revision 3117)
EDIT NAME (100, 64h)
The EDIT NAME command stores the name (as ASCII encoded characters) of the configuration currently stored in the WiDig. Upon completion of the command the WiDig sends out the NAME message.
The [BODY] of the EDIT NAME command is:
| 00000001: | 1; configuration number |
| 0aaaaaaa: | aaaaaaa = [0..127]; 1st character, default = “W” (57h) |
| 0bbbbbb: | bbbbbb = [0..127]; 2nd character, default = “i” (69h) |
| 0ccccccc: | ccccccc = [0..127]; 3rd character, default = “D” (44h) |
| 0ddddddd: | ddddddd = [0..127]; 4th character, default = “i” (69h) |
| 0eeeeeee: | eeeeeee = [0..127]; 5th character, default = “g” (67h) |
| 0fffffff: | fffffff = [0..127]; 6th character, default = “ ” (20h) |
| 0ggggggg: | ggggggg = [0..127]; 7th character, default = “ ” (20h) |
| 0hhhhhhh: | hhhhhhh = [0..127]; 8th character, default = “ ” (20h) |
