Firmware-811 Command-013

From I-CubeX Wiki
Revision as of 22:32, 28 May 2018 by Admin (talk | contribs) (Copied from Firmware-810 Command-013, revision 3730)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

DUMP INTERVAL (13, 0Dh)

The DUMP INTERVAL command can be used to retrieve the sampling interval of the sampling loop in the WiDig. The command can be used in both host and stand-alone modes of operation. Upon completion of the DUMP INTERVAL command the WiDig sends out the same message as the INTERVAL command.

The DUMP INTERVAL command has no [BODY].

Example:

240, 125, 0 {DEV}, 13 {DUMP INTERVAL}, 247 (F0h, 7Dh, 00h, 0Dh, F7h)
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-811_Command-013&oldid=4457"