WiConnect

From I-CubeX Wiki
Revision as of 04:18, 24 July 2020 by Admin (talk | contribs)
Jump to: navigation, search

WiConnect manages the USB, BLE-MIDI or WiFi-OSC/WS communications of the WiDig. It runs on the WiDig together with its other firmware.

WiConnect can be uploaded using ESPFlasherGUI for MacOS or Windows. To upload a WiConnect version, ONLY make two selections in ESPFlasherGUI. Select one of the WiConnect .bin files listed below as the firmware file (after you've downloaded it to your computer) and select the serial port (contains the text "SLAB" on MacOS and "COM" on Windows) from the pull-down menu to the right of the menu showing "926100". Then make sure no other software such as Connect is using the serial port and then click "Flash Firmware".

ESPFlasherGUI macos.jpg ESPFlasherGUI windows.jpg


Releases

  • 23 Jul 2020: WiConnect 1.103 BLE-MIDI client/server with USB pass-thru and LED control
  • 01 May 2019: WiConnect 1.002 BLE-MIDI server without USB pass-thru


Pre-Releases

  • 24 Jul 2020: WiConnect 1.919 WiFi-OSC/WS with USB pass-thru and LED control
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=WiConnect&oldid=4997"