Firmware-820 Command-101

From I-CubeX Wiki
Revision as of 00:03, 7 March 2022 by Admin (talk | contribs) (Created page with "==DUMP NAME (101, 65h)== The DUMP NAME command is used to obtain the name of the current configuration of the WiDig. Upon completion of the command the WiDig sends out the ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

DUMP NAME (101, 65h)

The DUMP NAME command is used to obtain the name of the current configuration of the WiDig. Upon completion of the command the WiDig sends out the NAME message.

The DUMP NAME command has the following [BODY]:

00000001: 1; configuration number
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-820_Command-101&oldid=5775"