Firmware-762 Message-111

LOW POWER AND COM (111, 6Fh)

This message contains the LED and serial (COM) port status of the USB-microDig. See the LOW POWER AND COM command for more information.

The [BODY] of the LOW POWER message is as follows:

000d0xyz:	d = 0; LEDs on
	d = 1; LEDs dimmed
	x = 0; DTR high
	x = 1; DTR low
	y = 0; RTS low
	y = 1; RTS high
	z = 0; SUSP low (USB enabled)
	z = 1; SUSP high (USB disabled)