Firmware-830 Command-101

From I-CubeX Wiki
Revision as of 21:25, 18 April 2023 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

DUMP NAME (101, 65h)

The DUMP NAME command is used to obtain the name of the current configuration of the WiDig. Upon completion of the command the WiDig sends out the NAME message.

The DUMP NAME command has the following [BODY]:

00000001: 1; configuration number
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-830_Command-101&oldid=6097"