Firmware-830 Command-030
Revision as of 00:13, 7 March 2022 by Admin (talk | contribs) (Copied from Firmware-820 Command-030, revision 5789)
DUMP TABLE ENTRY (30, 1Eh)
The DUMP TABLE ENTRY command retrieves a lookup table entry stored in non-volatile memory. The command can be used in both host and stand-alone modes of operation. Upon completion of the DUMP TABLE ENTRY command the WiDig sends out the same message as the TABLE ENTRY command. This command is not available for digitizers with hardware v7.0 or lower.
The [BODY] of the DUMP TABLE ENTRY command:
| 000nnnnn: | nnnnn = [0..31]; table number |
| 00000ddd: | ddd = [0..7]; table entry index MSB |
| 0ddddddd: | ddddddd = [0..127]; table entry index LSB |
