Firmware-830 Message-033

From I-CubeX Wiki
Revision as of 22:06, 18 April 2023 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

SOLO (33, 21h)

This message contains the WiDig SOLO status. See the SET SOLO command for more information on the SOLO feature.

The [BODY] of the SOLO message is as follows:

0zyyyxxx: xxx = [0..7]; sensor input number
yyy = [0..7]; virtual input number
z = 0: solo disabled
z = 1: solo enabled for the sensor input only
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-830_Message-033&oldid=6213"