WiDig-801 QuickStart WidiBud

These instructions assume the WiDig's BLE is enabled. The WiDig's blue LED will blink slowly (~1 sec interval) to indicate its BLE is enabled and available for a connection. Once connected via BLE the blue LED will be steady on. If the blue LED is not slowly blinking BLE is not enabled. To enable the WiDig's BLE, see Connect QuickStart.

The WIDI Bud adapter is a BLE MIDI to USB MIDI adapter that provides BLE MIDI connectivity to any system that supports USB MIDI.

It normally will automatically pair when there is a BLE MIDI device in its vicinity, but when needed (such as when running multiple BLE MIDI devices, for example), the WIDI Plus application can be used to manually connect to a BLE device (OSX and Windows versions).

To manually connect/disconnect BLE MIDI devices, open the WIDI Plus application, click on the "Bluetooth tab" on the top, and then select the device you want to connect or disconnect:

The red LED of the WIDI Bud flashes slowly (~1 sec interval) when disconnected, and pulses at a faster rate when connected.

A standard MIDI port is created by the WIDI Bud and can be used by EditorX and other MIDI applications for configuring and obtaining data from the WiDig.