EditorX-80 Sensor Input MIDI Message

From I-CubeX Wiki
Jump to: navigation, search

The MIDI Message subsection configures the sensor input to output MIDI messages that contain the sensor value.

The following MIDI messages can be selected:

  • NoteOff
  • NoteOn
  • KeyPressure
  • ControlChange
  • ProgramChange
  • AfterTouch
  • PitchBend

If the sensor input is configured to process values continuously as well as detect peaks or dips and their ending, the peak or dip and their ending are sent in the form of the selected MIDI message but additional MIDI key-pressure messages are sent to transmit the sensor value after the peak or dip is detected and until their end is detected.

Sensor-input controlchange.png Sensor-input pitchbend.png

Please refer to the EDIT CONFIG command for more information about MIDI messaging than provided here.

Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=EditorX-80_Sensor_Input_MIDI_Message&oldid=3245"