EditorX-73 Sensor Input Digital Sensors

From I-CubeX Wiki
Jump to: navigation, search

Digital Sensors

The following digital sensor presets are available:

  • HotSpot2D
  • Magnetic3D
  • Moist
  • MoveAlong
  • MoveAround
  • Orient3D


HotSpot2D

See the HOTSPOT2D function for more information.

Editorx-73 sensor hotspot2d.png


Magnetic3D

See the MAGNETIC3D function for more information.

Sensor magnetic3d.png


Moist3D

See the MOIST3D function for more information.

Editorx-73 sensor moist3d.png


MoveAlong

See the MOVEALONG function for more information. This function is only available on the USB-microDig, it is not available on the Wi-microDig.

Sensor movealong.png


MoveAround

See the MOVEAROUND function for more information.

Sensor movearound.png


Orient3D

See the ORIENT3D function for more information.

Sensor orient3d.png


Example:

If the sensor is digital, eg. an Orient3D, the parameters that the sensor captures are represented as virtual sensor inputs and mapped as per the processing section. By default (after clearing the digitizer configuration) they are mapped to a ControlChange MIDI message with their controller numbers incremented sequentially. For example, if the Orient3D is plugged into port 1, by default its heading value is represented as sensor input 1 and output as MIDI controller 0, its pitch value is represented as sensor input 2 and output as MIDI controller 1, and its roll value is represented as sensor input 3 and output as MIDI controller 2.
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=EditorX-73_Sensor_Input_Digital_Sensors&oldid=1255"