EditorX-82 Data

The Data section sets the MIDI output port, OSC status and recording status.

MIDI Out Port

The MIDI Out Port pull-down menu will show the available MIDI ports that are available for forwarding channel voice MIDI messages from the connected digitizer. This setting cannot be saved in the digitizer but it can be saved as an EditorX preset. EditorX must be running for this feature to be operational. In the picture below the synthesis engine that is included in EditorX is selected, so that sensor data that is mapped to a MIDI message can generate sound.

The "Off" button sends a MIDI All Sound Off message on all MIDI channels to the device connected to the MIDI Out Port. The "Reset" button sends a MIDI System Reset message to the device connected to the MIDI Out Port.

OSC

EditorX can be configured to output and/or receive OSC (Open Sound Control) messages. The Edit button opens the OSC window. The On/Off button enables/disables sending and receiving of OSC messages. To use the OSC feature EditorX has to stay running.

Recording

The Edit button opens the Recording window. The Start/Stop button starts/stops recording. The Open/Close button opens/closes the Recording window with more controls. To use the recording feature EditorX has to stay running.