EditorX-82 Sensor Input Digital Sensors

From I-CubeX Wiki
Jump to: navigation, search

The "L" and "S" buttons in the left top allow for loading and saving the settings of one virtual sensor input.

Editorx-81 sensor input digital section.png


Digital Sensors

The following digital sensor presets are available:

  • Air2D
  • AngleD
  • BioAirD
  • BioBeat3D
  • HotSpot2D
  • Light2D
  • Magnetic3D
  • Moist
  • MoveAlong
  • MoveAround
  • Orient3D
  • Orient4D
  • Orient5D
  • ReachCloseD
  • ReachFarD
  • ReachID
  • ReachOnD
  • Swipe3D
  • VoltD


Air2D

See the AIR2D function for more information.

Editorx-81 sensor air2d.png


AngleD

See the ANGLED function for more information.

Editorx-81 sensor angled.png


BioAirD

See the BIOAIRD function for more information.

Editorx-81 sensor bioaird.png


BioBeat3D

See the BIOBEAT3D function for more information.

Editorx-81 sensor biobeat3d.png


HotSpot2D

See the HOTSPOT2D function for more information.

Editorx-81 sensor hotspot2d.png


Light2D

See the LIGHT2D function for more information.

Editorx-81 sensor light2d.png


Magnetic3D

See the MAGNETIC3D function for more information.

Editorx-81 sensor magnetic3d.png


Moist3D

See the MOIST3D function for more information.

Editorx-81 sensor moist3d.png


MoveAlong

See the MOVEALONG function for more information. This function is only available on the USB-microDig, it is not available on the Wi-microDig.

Editorx-81 sensor movealong.png


MoveAround

See the MOVEAROUND function for more information.

Editorx-81 sensor movearound.png


Orient3D

See the ORIENT3D function for more information.

Editorx-81 sensor orient3d.png


Orient4D

See the ORIENT4D function for more information.

Editorx-81 sensor orient4d.png


Orient4D

See the ORIENT5D function for more information.

Editorx-82 sensor orient5d.png


ReachCloseD

See the REACHCLOSED function for more information.

Editorx-81 sensor reachclosed.png


ReachFarD

See the REACHFARD function for more information.

Editorx-81 sensor reachfard.png


ReachID

See the REACHID function for more information.

Editorx-81 sensor reachid.png


ReachOnD

See the REACHOND function for more information.

Editorx-81 sensor reachond.png


Swipe3D

See the SWIPE3D function for more information.

Editorx-81 sensor swipe3d.png

VoltD

See the VOLTD function for more information.

Editorx-82 sensor voltd.png


Example:

If the sensor is digital, eg. an Orient3D, the parameters that the sensor captures are represented as virtual sensor inputs and mapped as per the processing section. By default (after clearing the digitizer configuration) they are mapped to a ControlChange MIDI message with their controller numbers incremented sequentially. For example, if the Orient3D is plugged into port 1, by default its heading value is represented as sensor input 1 and output as MIDI controller 0, its pitch value is represented as sensor input 2 and output as MIDI controller 1, and its roll value is represented as sensor input 3 and output as MIDI controller 2.
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=EditorX-82_Sensor_Input_Digital_Sensors&oldid=5515"