Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


Checkout
MoveThruOn v2.2 $16.06US
 
2 - 6 : $15.26US ( save 5% )
7 - 19 : $14.46US ( save 10% )
20 + : $12.85US ( save 20% )
excl. sales tax

Be there not or be I-CubeX-ed. The MoveThruOn is an analog sensor with only two output values (0 and a high value) to indicate some movement (up to 5 meter away) was detected, or none. Once movement has been detected it holds the value for several seconds. The sensor uses radar to detect movement of larger objects like humans and can sense through walls and doors. Of course, if the walls/doors are thick the radar may not be able to penetrate and hence block the sensor from operation. We have not tested the sensor to determine which materials specifically block it.

Application examples

  • Use for detection of motion of animals or humans in rooms (doesn't detect just presence, because only movement is detected). Use two or more to determine the direction of a movement.

Other human, animal and object sensors

We offer a number of sensors to detect motion and/or presence and/or proximity of humans, animals and objects in a space:

  • For a motion sensor with variety of sensitivity and output configuration options, view the MoveOn v1.8.
  • If you need a motion sensor of which the output changes each time any motion is detected so that it can be smoothed to give a signal that roughly represents the amount of activity, checkout the MoveOn v1.4.
  • A smaller version which output stays high while motion is detected and during a fixed length of time afterwards, try the MoveMiniOn.
  • Want to detect motion through walls ? See the MoveThruOn.
  • Need to detect presence as well as body temperature ? Try the HotSpot2D.
  • The Advance-645 detects the distance of a person in a 50° cone.
  • Need pin-point distance detection ? The ReachFar and its digital, laser-accurate cousin ReachFarD detect distance up to 4 m within a cone of a few degrees. The ReachClose and its digital, laser-accurate cousin ReachCloseD do the same but up to 2 m.
  • Setup perimeters with break-beams made from a SeeLaser-Red or the invisible SeeLaser-IR (or any of our SeeLaser products) and a Flash.
  • Place TapTile, TapMatOn or TapStripOn sensors on the floor or stairs to detect a person stepping or standing on it, and even get a measure of the exerted force.
  • To know exactly who is present, use the ReachID and let each visitor be detected through their RFID tag.

Technical specifications

Product MoveThruOn sensor
Version 2.2 (October 2023)
Sensing parameter displacement
Sensing method 3 GHz microwave radar
Active volume 360 ° azimuth (ie. moving left-right) angle, 180 ° pitch (ie. moving up-down) angle
Range 5 m (16 ft) within active volume, through eg. a wooden door
Resolution 1 bit (motion detected or no motion detected)
Output pulse width 5 s (upon motion detection sensor outputs high value during this time)
Calibration
Motion Voltage (use 5 V power supply) 7-bit MIDI value (use 'no processing' editor preset)
no 0.00 0
yes 3.3 84
Power supply 4 to 28 V DC, ? mA
Operating conditions -? to ? °C (-? to ? °F)
Dimensions 18 x 36 x 4 mm (0.71 x 1.4 x 0.2 inch)
Mounting six 1.5 mm (0.059 inch) mounting holes spaced apart 15 mm (0.59 inch) and 18 mm (0.71 inch) length-wise and 14 mm (0.55 inch) width-wise
Cable 1.0 m (39 inch), shielded, red wire = power, uninsulated wire = ground, black wire = sensor output, extendable at least 100 m (328 ft) with ExtendCableD-10
Connector male 1x4 plug with 3 pins in a row spaced 2.54 mm (0.100 inch)
Weight 12 g (0.42 oz), incl. cable
Software support

  1. Our SensePlay software is a very easy way to quickly map sensor data to (sequences of) sounds, images and videos using a drag & drop user interface.
  2. Our EditorX software allows you to configure the digitizer to process and map the sensor data of multiple sensors simultaneously.
  3. Our Link software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the sensor data of multiple sensors simultaneously.
  4. Our SensorX software allows you to receive the sensor data from the digitizer and use your computer to view, calibrate, record, process and map the data of a single sensor.

Application notes
  1. Make sure the sensor is plugged into the Digitizer with the red wire connected to power. Reversing the plug may cause damage to the sensor.
  2. Best results are obtained if the sensor is placed up high, about 2 to 3 meter (7 to 10 feet) in the area it is being used in.
  3. The sensor needs a few seconds to complete its reset procedure before it is operational.

This page was updated on Saturday 18 November 2023.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
MoveOn v1.4 (obsolete)
MoveOn v1.4 (obsolete)
SeeIR v1.2 (obsolete)
SeeIR v1.2 (obsolete)
ReachFarD v1.1 (obsolete)
ReachFarD v1.1 (obsolete)
Advance-645 v1.0 (obsolete)
Advance-645 v1.0 (obsolete)
TapMatOn v1.0
TapMatOn v1.0
ReachClose v3.0
ReachClose v3.0
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page