Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


Checkout
CVolt v1.0 $21.67US
 
2 - 6 : $20.58US ( save 5% )
7 - 19 : $19.50US ( save 10% )
20 + : $17.34US ( save 20% )
excl. sales tax

Control Voltage anyone ? The CVolt is a DAC (Digital to Analog Converter) that allows you to interface with analog synths. Use gestures to wave at your rack of analog gear. A digital I2C actuator, that outputs high resolution 12-bit voltages.

Application examples

  1. Control an analog synth's VCO (Voltage Controlled Oscillator) with the CVolt via 0-5V. Setup a ReachCloseD, map it to a CVolt and sweep that VCO with your hand motions.



Technical specifications

Product CVolt actuator
Version 1.0 (October 2021)
Actuator type DAC
Output voltage range 0.0 - 5.0 V with 5V power supply
Output impedance 1 Ohm
Non-linearity ±2 LSB (typical), ±14.5 LSB (max)
Output resolution 12 bit
Response time 15 µs (max)
Power supply 2.7 to 5.5 V DC, 0.4 mA max
Operating temperature -40 to 125 ºC (-40 to 257 ºF)
Dimensions 16 x 16 x 6 mm (0.63 x 0.63 x 0.24 inch)
Mounting no mounting holes
Cable 1.0 m (39 inch) shielded, red wire = power, black wire = ground, grey wire = I2C data (SDA), white wire = I2C clock (SCL), extendable at least 50 m (164 ft) with ExtendCableD-10
Connector male 1x4 plug with a row of 4 pins spaced 2.54 mm (0.100 inch)
Weight 12 g (0.42 oz) incl. cable
Software support
  • Our EditorX software allows you to configure the digitizer to control multiple actuators simultaneously.
Application notes
  1. Make sure the actuator is plugged into the digitizer with the red wire connected to power. Reversing the plug or applying power with reverse polarity may cause damage to the actuator.
  2. Requires a digitizer with digital (I2C) ports, eg. the WiDig or USB-microDig.
  3. See pict below for instructions how to connect. The yellow wire carries the output voltage, whereas the black wire is connected to ground. 5V is available from the receptacle next to the yellow wire.
  4. The default I2C address is 98 (0x62). Both I2C lines have 4.7 kOhm pull-up resistors.
  5. Our software enables you to use most features. For more technical specs, and to find out how to control the actuator in detail, please consult this datasheet.

This page was updated on Saturday 16 October 2021.
Comments by customers Write Review
There are currently no comments on this product.
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page