Difference between revisions of "Firmware-812 Command-111"
(Created page with "==LOW POWER (111, 6Fh)== This command sets the WiDig to dim the LEDs. Upon completion of the command the WiDig sends out the LOW POWER message....") |
(No difference)
|
Revision as of 15:13, 5 March 2022
LOW POWER (111, 6Fh)
This command sets the WiDig to dim the LEDs. Upon completion of the command the WiDig sends out the LOW POWER message.
The [BODY] of the LOW POWER command is:
| 0xxxxxxx: | xxxxxxx = 0; LEDs on |
| xxxxxxx = 32; LEDs dimmed |
