Difference between revisions of "Firmware-830 Message-033"
(Copied from Firmware-820 Message-033, revision 5763) |
(No difference)
|
Revision as of 23:54, 6 March 2022
SOLO (33, 21h)
This message contains the WiDig SOLO status. See the SET SOLO command for more information on the SOLO feature.
The [BODY] of the SOLO message is as follows:
| 0zyyyxxx: | xxx = [0..7]; sensor input number |
| yyy = [0..7]; virtual input number | |
| z = 0: solo disabled | |
| z = 1: solo enabled for the sensor input only |
