Firmware-812 Command-111
Revision as of 15:13, 5 March 2022 by Admin (talk | contribs) (Created page with "==LOW POWER (111, 6Fh)== This command sets the WiDig to dim the LEDs. Upon completion of the command the WiDig sends out the LOW POWER message....")
LOW POWER (111, 6Fh)
This command sets the WiDig to dim the LEDs. Upon completion of the command the WiDig sends out the LOW POWER message.
The [BODY] of the LOW POWER command is:
| 0xxxxxxx: | xxxxxxx = 0; LEDs on |
| xxxxxxx = 32; LEDs dimmed |
