Firmware-52 Command-093

From I-CubeX Wiki
Revision as of 21:32, 20 January 2016 by Admin (talk | contribs) (Created page with "==MIDI THRU (93, 5Dh)== This command sets the MIDI thru status of the microDig. The default value is on, ie. MIDI thru is disabled. The MIDI THRU command configures the micro...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

MIDI THRU (93, 5Dh)

This command sets the MIDI thru status of the microDig. The default value is on, ie. MIDI thru is disabled. The MIDI THRU command configures the microDig capability to pass received MIDI messages on to its MIDI output. Upon completion of the command the USB-microDig sends out the same command.

The [BODY] of the MIDI THRU command is:

0xxxxxxx: xxxxxxx = 0; MIDI thru off
xxxxxxx = [1..127]; MIDI thru on
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-52_Command-093&oldid=675"