Firmware-811 Command-093

From I-CubeX Wiki
Jump to: navigation, search

BLE-MIDI (93, 5Dh)

This command sets the BLE-MIDI (MIDI via Bluetooth Low Energy) status of the WiDig. Upon first use, BLE-MIDI is enabled. The BLE-MIDI command configures the WiDig to set the baud rate of the WiDig COM port to 31.25 kbps immediately as well as upon power-up. Upon completion of the command the WiDig sends out the same command.

The [BODY] of the BLE-MIDI command is:

0xxxxxxx: xxxxxxx = 0; BLE-MIDI off
xxxxxxx = [1..127]; BLE-MIDI on
Retrieved from "https://infusionsystems.com/support/wiki/index.php?title=Firmware-811_Command-093&oldid=4441"