Home About News New Customer My Account My Cart All products Download Support
Products Get Started
Demos Contact Us
Shop
Browse products
All products
My account
My quotes
My cart
Login
Currency:
Events
Click here for upcoming events ..


BioFlex v1.3 (obsolete)

The BioFlex was replaced by the BioVolt.

Measure your muscle power. Perform "6 million dollar" bionic music. Developed by BioControl, this sensor measures the EMG of your arms and legs. View the sensor data using our BioFlex software (see below). Use the BioFlex with a wireless Wi-microSystem in all cases to operate conveniently without tether and ensure electrically safe operation (see disclaimer below). See this videoclip for a demo !


Application information

Product BioFlex sensor
Examples

The BioFlex combines perfectly with the BioBeat, BioEmo and BioVolt. Become zen and still perform.

  • Use BioFlex with the MuscleTrainer software (see below) for rehab.
  • Add intensity to your musical performance by tweaking your sound through muscle tension and more body physiology. Link dance to audio-visual expression.
  • For whole-body expression go bodysuit, capture all your joints' movements and express with all your extremities. Combine with BendMicro, BendMini and BendShort sensors from finger to toe. Add a GForce3D-6 on your feet and hands to capture kicks and punches. A Hot will keep you in check of your body temp. Top it all off with a TouchGlove on both hands to always be able to touch-control your performance, even when you're doing a handstand.
  • Read up on Atau Tanaka's work with the BioFlex.
  • Read up on Alexis Kirke's work with the BioBeat, BioEmo, BioFlex and BioWave.
Manuals

Using the sensor with the Wi-microSystem not only ensures electrically safe operation (see disclaimer below) but also enables you to use the sensor without being tethered to your computer or MIDI device.

The sensor includes a notch filter to reduce power grid noise (50 or 60 Hz). Note that the sensor is shipped with this power grid notch filter set to 50 Hz. It can be changed if necessary to 60 Hz by cutting the blue jumper wire on the side of the board inside the neoprene band.

Software

Disclaimer The BioFlex sensor is to be used only with extreme caution according to the following instructions. It is intended for research purposes only and not intended for use in any clinical medical practice whatsoever.
  1. The BioFlex sensor must only be plugged into a battery powered, wireless I-CubeX digitizer (eg. the Wi-microDig or Wi-miniDig) manufactured by Infusion Systems and not any other digitizer.
  2. The BioFlex sensor must only be connected as shown in the diagram on the wireless digitizer.
  3. The wireless digitizer used with the BioFlex sensor must only be powered by a common 9V battery as used in consumer goods or an I-CubeX BatteryPack.
  4. Only I-CubeX sensors may be connected to the wireless digitizer that is used for interfacing the BioFlex.
  5. When using the BioFlex sensor, I-CubeX products may not be connected in any way to the electrical power grid or any other high voltage source.
Any violation of these instructions nullifies any warranty (express or implied) and nullifies any liability or culpability (express or implied) of Infusion Systems Ltd.. Any violation of these instructions can result in electrocution, severe injury, or even death.



Technical specifications

Product BioFlex sensor
Version 1.3 (August 2012)
Sensing parameter skin surface voltage
Sensing method Bipolar voltage measurement
Gain 1000
Bandwidth 1 – 200 Hz with 50/60 Hz notch filter
Power supply 4.75 to 5.25 V DC, 5 mA max
Sensor dimensions 75 x 26 x 13 mm (3.0 x 1.0 x 0.50 inch), electrode distance 16 mm (0.63 inch), total strap length 43 cm (17 inch)
Weight 50 g (1.8 oz) incl. cable and strap
Cable 1.0 m (39 inch) shielded, red wire = power, black wire = ground, white wire = signal, maximum extension 30 m (98 ft)
Connector male plug with a row of 3 pins spaced 2.54 mm (0.100 inch)

This page was updated on Thursday 16 April 2015.
Comments by customers Write Review
There are currently no comments on this product.
Customers who bought this product also purchased
BioWave v1.3 (obsolete)
BioWave v1.3 (obsolete)
BioWave v1.2 (obsolete)
BioWave v1.2 (obsolete)
Humid v1.0
Humid v1.0
ExtendCable-01 v1.1
ExtendCable-01 v1.1
GlobalAdapter-0901 v5.0
GlobalAdapter-0901 v5.0
BatteryPack-1800 v1.0 (obsolete)
BatteryPack-1800 v1.0 (obsolete)
Product Search




Advanced Search
Comments more
Write ReviewWrite a comment on this product!
Support
New Customers

Need help?

Resources

Downloads

User forums

Linkedin group LinkedIn group

Facebook page Facebook page